Clutch half motor (B)
Clutch half is foreseen to be used on HITEC Luxembourg DABS, to interface the clutch half on the drive motor axis to the compatible mixing chamber drive axis. Consist of half a clutch DIN EN ISO 13849 with a bore of d=19 mm. It is fixed to the appropriate axis by clamping with the help of a screw M6x16 mm.
Align the clutch on the drive motor axis such that its inside is more or less 2 mm out of motor axis. Firmly tighten the M6x16 screw to avoid slippage of the clutch at maximum torque. It connects to the appropriate clutch half on the mixing chamber drive axis by means of a clutch connection rubber block.
|Dimension (L x W x H)||4 x 4 x 4 cm|