Cleaning Brush Set (100 Pcs) (B)
The brush cleans the bottom surface of the preload and the tip of the pellet support, removing dust and pellets after a measurement or before a calibration.
Its replacement should only be considered if it has been deformed several times and no longer turns in a straight line or if a large part of the bristles are missing.
Mounting
The brush is mounted on front side of the cleaning brush drive kit.
The brush is held in place by the screw tightened on the drive kit.
If brush replacement is necessary, it may also be a good idea to check and clean the "cleaning brush drive kit" as dust build-up can make it difficult to turn.
The right side cover must be opened to get access to the "cleaning brush drive kit".
Additional information
| Weight | 0,05 kg |
|---|---|
| Dimensions | 2,0 × 1,5 × 1,5 cm |
