Proximity Switch (C)
This proximity switch is in use for three different detection points, the position of carriage u-block, the return back position of the brush motor and for the reference of position one of the RASB wheel.
Note
This part is only for the latest version of IPHT (IPHT-01).
Mounting
The proximity switch is replaced according to the reference point position of the carriage U-block and the brush motor completely backwards, so that the distance between them is equal to approx. 1 mm.
For RASB wheel position one reference, the proximity switch should be set almost flat, slightly below the top surface of the upper table.
Please refer to the device user manual, or contact the customer support at service@hitec.lu.
Additional information
| Weight | 0,02 kg |
|---|---|
| Dimensions | 4,0 × 2,0 × 2,0 cm |
