Linear Guide (B)
Delivery includes the “Linear Guide”, one fixing screw and one mechanical stopper.
Note
Along with this part we also recommend purchasing the “Belt Squeeze Plate V2 (B)”, if not already installed.
Mounting
The linear guide should be cleaned only with alcohol, or similar products, or possibly with the "Damping Oil", dry it completely and very well.
Apply a drop of silicone grease to both sides of the linear guide running surfaces. Move the carriage up and down several times to let the grease penetrate inside the carriage, then clean the guide surface completely and very well.
Follow the guide sent in the shipment to see how to install the mechanical stopper.
Please refer to the device user manual or contact the customer support at service@hitec.lu.
Additional information
| Weight | 0,24 kg |
|---|---|
| Dimensions | 16,0 × 8,5 × 2,0 cm |
