Timing Belt Linear Guide (5 Pcs – Closed) (B)
The timing belt linear guide is the one which drives the pellet support up and down.
This timing belt replaces the article IPHT-1104 (timing belt linear guide), and it is suitable for all IPHT models.
Mounting
For the replacement or installing a new one, the right side cover from the device must be opened to get access.
The device must be set in cleaning position, the Main Block must be dismounted from the main plate by releasing the two bolds in the back and the Lower Counter Wheel must be loosen by untighten its holding screw. Place the new timing belt around the main plate cogwheel and the Lower Counter Wheel, get in tension by pulling the Lower Counter Wheel down and tighten its holding screw.
Use a metric Allen key to remove the bolts from the main block and the screw holding the Lower Counter Wheel.
Please refer to the device user manual, or contact the customer support at service@hitec.lu.
Additional information
| Weight | 0,02 kg |
|---|---|
| Dimensions | 14,0 × 11,0 × 0,5 cm |
